ISO13918 Stainless steel CD Weld Stud

CD Weld Stud 1.Size;M3-M12 L:5-200mm 2.Certificates:RoHS 3.Standard; ISO13918 DIN32501 4.OEM Accepted reach total Length200

Stainless steel CD Welding Screws/ Weld Stud

 Material Available:   Stainless steel /Carbon STEEL/ AL / Copper/Bronze.

 Plating:                     Copper plated/ Cleaned

 Size :                         M3-M12

 Length:                     5-200MM 

 Standard:                 ISO13918/DIN32501

 Threads:                  Metric/SAE/Imperial

 Stocking:                 Large-Stocking System, Low MOQ.

                                    RoHS  √

We accept special sizes and producing as per your drawing/Print.

The Production;:

The CD Welding Studs are made by Cold Forming / Truning/Lathing Technical.

1.For Flanged Studs, By Cold Forming Technical.(Making the Flange an the Welding Point )

2. For Non-Flanged Studs, Cold Forming 1st  making the "Weld Point" and "Flanges", then Turning/Lathing CNC to cut off the Flanges. Or use  directly Turning/Lathing  to make the Weld Point. and then Threaded.

The Process;

             

 

1. Stud against the work plate

2. Stored energy discharged through special weld "timing" tip;  stud starts downward

3. Stud forced into molten metal

4. Metal solidifies; weld is completed in a split secon

Type of Material;

Materrial	Carbon STEEL	STAINLESS STEEL
	C-0.20%Max     P-0.04% Max	AISI 304 Std.
	Mn-0.90%max   S-0.05%max	Other grade available upon request
Mechanical Properties	Tensil 60,000 psi (min.)                            Yiled   50,000 si (min.)	Tensil 85,000 psi (min.) Yiled 40,000 si (min.)
PLATING	Copper plating is standard	Does not apply to Stainless
Annealed	Studs are annealed where required	Studs are annealed where required
Material	ALUMINUM	BRASS
	Alloy 1100 & 5000 Series	Alloy (lead free) 70 - 30 std.
	Other alloys available upon request	Other alloys available upon request
MECHANICAL PROPERTIES	Values for various alloys available upon request	Tensil 70,000 psi (min.) Yiled 50,000 si (min.)

Capacitor Discharge (CD) Stud Welding   

Advantages of CD

1.Welding to thin and sheet metal grade material

2.No reverse side marking

3.Up to 3/8" diameter fasteners

4.Only 115 volt power required

5.Up to 20 welds per minute

6.Welded metal fastening of dissimilar metals

Weldability; (More info. pls see ISO 14555.)

Only weldable materials shall be used for studs.

Non-alloyed steel studs are weldable if the hardness in crease is low. In general this is the case when the carbon content is  

≤0.20%.Fee-cutting steel studs are generally not weldable.Killed materials shall be used.

Austenitic Stainless steel studs are generally weldable.Fee-cutting steel studs are generally not weldable.

Durability;

The durability of studs is dependent on their use and environmental exposure to which they are subject.

The mechanical durability of studs is assured for a reasonable economic working life if the studs comply with

the requriements of this International Standard 13918.

Size Ref. Mertic and SAE/Imperial sizes;

/ PT ,IT Type

PT TYPE

IT TYPE

Each Size can be reach a Length of 200mm. Pls contact us for Extra Long Weld Stud.

CD Stud Types*: (Not all available styles shown, for SAE /Imperial Sizes please contact us ,

                                we would reply you with 24 hrs

We also have other types of CD WELD STUD;

To Reudce,Reuse&Recycle to GREEN Our World.

Cycle-Usage of the Water.Bring as less  harm  as we can to our Earth.

Our  Sewage treatment system.

About Us: 

Gaungzhou ShengFeng Hardware Co.,LTD.

We are Weld Stud manufactures and distributes a complete line of stud welding products. We are always fully stocked with many standard sizes of weld studs ( CD and ARC ,short cycle Weld Stud,),  Weld Nuts(Hex/Square ),Rivets(Blind Rivet/Solid Rivet),Rivet Nuts and PEM Clinching Fasteners(PEM Clinching Stud/Nut ,Standoffs).

We now service for GM ShangHai,GuangZhou Toyota,HYUNDAI,NISSAN Zhengzhou.

                                SIEMENS,WHIRLPOOL,MCLI,SAMSUNG,Huawei,ZTE.

Exportting Mainly to EU,SOUTH/NORTH AMERICA,Rest to Middle East and Africa.

We believe Service that is second to none is always provided at GZSF Hardware Co Ltd. we Deliver our promise of great service ,we have been dedicated to providing our customers with quality products, service, and on-time deliveries. 

Give us a call or email to see what a difference our personalized, professional service can do for you. We guarantee that we will exceed your expectations!

ISO13918 Stainless steel CD Weld Stud